青島青橡橡膠有限公司成立于2008年，注冊資本1.68億元，坐落在青島西海岸新區（黃島區），占地95000平方米，擁有500多名員工。

青橡橡膠是國家級高新技術企業，專注于生產和研發API 7K、API 16C石油鉆采軟管（AlienDrill）；超耐磨發酸化壓裂軟管（AlienFrac）；德國標準，美國標準，日本標準和國標的高品質液壓膠管。我們擁有高水準的膠管研發檢測中心，被認定為青島市企業技術中心。擁有臺灣高鐵橡膠檢測設備，動態式脈沖測試機，爆破壓力測試機，耐臭氧測試機，耐高溫耐低溫測試機，化學分析測試設備等各種先進的檢測設備。

我司生產的AllienDrill石油鉆采軟管，包含API-7K 高壓水泥軟管、旋轉鉆井和減振軟管、API-16C 節流和壓井軟管、防噴器控制軟管等，采用現代機器和技術生產，為全球油田提供動力。AlienFrac超耐磨酸化壓裂軟管，工作壓力可達到15,000PSI和20,000PSI，可有效替代鋼管，安裝更靈活，使用壽命更長。

我司金脈王Goldpulse®品牌(TB/T3474.2-2018, EN45545-2:2013 機車軟管標準), 脈王Kingpulse®品牌 (ISO 18752DC 標準), 脈霸Impulmax®品牌 (ISO 18752 CC 標準), 青橡Qingflex®品牌 (ISO 18752 BC 標準),飛爾達Flexstar®品牌 (ISO 18752 AC標準) 液壓膠管產品已經被廣泛用于國內工程機械, 礦山機械和其他各種液壓設備, 同時出口美國, 歐洲, 日本, 南美等國家和地區。

我司還生產工業軟管，包括油/水吸排軟管、油罐車軟管、空氣軟管、混凝土泵送軟管等。這些軟管每卷長度可達61米，為客戶提供方便和高效的解決方案。

Qingdao Qingflex Hose Factory was established in 2008, registered capital 168 million RMB, is located in Qingdao West Coast New Area (Huangdao District), covers an area of 95000 square meters and has more than 500 workers. Qingflex is a National high-tech enterprise, who focus on R & D and manufacturing oilfield drilling hose according to API 7K, API 16C, acid frac hose, and hydraulic hose according to DIN standard and SAE standard, Japanese stand and GB standard. We have high level Rubber Hose R & D center and Test center, recognized as Qingdao Enterprise Technology Center. We have Gotech rubber test equipment, Dynamic impulse testing machine, Chemical analysis test equipment and other advanced test equipment.

Qingflex manufacturers AllienDrill hoses, API-7K Cement hose, Rotary Drilling and Vibrator Hose, API-16C Choke and Kill Hose, BOP Control Hose, and more, which are produced by modern machines and technology, powering the oilfield worldwide.

Qingflex manufactures AlienFrac Acid Fracturing Hose with swaged fittings, which can reach the W.P. ratings of 15,000PSI and 20,000 PSI, can effectively replace the steel pipe for more flexible installation and longer live cycles.

Our own branding of hydraulic hoses - Goldpulse® (TB/T3474.2-2018, EN45545-2:2013 standard), Kingpulse® (ISO 18752 DC standard), Impulmax® (ISO 18752 CC standard), Qingflex® (ISO 18752 BC standard), and Flexstar® (ISO 18752 AC standard) have been widely used in domestic construction machinery, mining machinery and other hydraulic equipment, at the same time, have been exported to international market, such as USA, Europe, Japan, South America and other area.

Qingflex also produces industrial hoses, including oil/water suction and discharge hose, tank truck hose, air hose, concrete pumping hose, etc. These hoses can be produced up to 200ft length per roll, offering convenience and efficiency to customers.

Qingflex commitment to cutting-edge technology and innovative designs ensures top-quality products that excel in the most demanding conditions. We take pride in being a trusted source for reliable, high-performance hoses that redefine industry standards.